PDK Devices in 3D

Real devices from open process design kits, extruded from their layouts so you can turn them over and see what the masks make.

Every model on this page is drawn by its PDK’s own gdsfactory implementation, and each layer is extruded to the thickness and height given by that PDK’s layer stack. Heights are to scale, with no vertical exaggeration unless you choose one below. The oxide cladding and the substrate are left out so that you can see the silicon, nitride or lithium niobate; a translucent plate marks the top of the buried oxide. The script that makes the models is tools/export_3d.py.

Credit. The devices belong to their designers and PDKs, named on each card. They are shown here under the PDKs’ open-source licences (all MIT), with the papers that describe them; please cite those papers, not this page, when you use a design.

How to use the viewers

Drag to rotate, right-drag or two-finger drag to pan, and scroll or pinch to zoom once you have clicked into a viewer. Click a layer in a legend to hide or show it. The vertical-stretch buttons apply to every viewer: a 220 nm film is thin next to a 10 µm ring, and stretching it helps you see the etch steps.

vertical stretch

SiEPIC EBeam PDK

The SiEPIC EBeam PDK [15] is the open kit behind the edX course Silicon Photonics Design, Fabrication and Data Analysis and the openEBL runs [14]: 220 nm SOI at 1550 nm, patterned by electron-beam lithography. Its fixed cells are hardware-validated designs from the UBC group and collaborators; the models here come through its gdsfactory implementation, ubcpdk [18].

Y-branch splitter 220 nm SOI, 1550 nm, electron-beam lithography · 14.8 × 6.0 µm · cell ebeam_y_1550 A 50/50 splitter whose taper shape was optimised by particle-swarm optimisation in 3D FDTD; about 0.3 dB insertion loss. Design: Y. Zhang, S. Yang, A. E.-J. Lim, G.-Q. Lo, C. Galland, T. Baehr-Jones and M. Hochberg. From: SiEPIC EBeam PDK (MIT), via ubcpdk (gdsfactory). [46]
Focusing sub-wavelength grating coupler (TE, 1550 nm) 220 nm SOI, 1550 nm, electron-beam lithography · 32.54 × 20.23 µm · cell ebeam_gc_te1550 A fully etched, focusing grating coupler whose teeth are sub-wavelength gratings, so a single etch gives a high efficiency and low back-reflection. Design: Yun Wang, Lukas Chrostowski et al. (UBC). From: SiEPIC EBeam PDK (MIT), via ubcpdk (gdsfactory). [51]
Broadband directional coupler 220 nm SOI, 1550 nm, electron-beam lithography · 70.75 × 5.2 µm · cell ebeam_bdc_te1550 A 3 dB coupler made of two waveguides of different widths, whose phase control flattens the split ratio over a wide band. Design: Zeqin Lu, Han Yun, Yun Wang, Zhitian Chen, Fan Zhang, Nicolas A. F. Jaeger and Lukas Chrostowski. From: SiEPIC EBeam PDK (MIT), via ubcpdk (gdsfactory). [52]
Adiabatic 3 dB coupler 220 nm SOI, 1550 nm, electron-beam lithography · 195.8 × 3.53 µm · cell ebeam_adiabatic_te1550 A 2 × 2 splitter that converts the input mode slowly into the even or odd supermode, so its split ratio barely depends on wavelength. Design: Han Yun et al. (UBC). From: SiEPIC EBeam PDK (MIT), via ubcpdk (gdsfactory). [53]
Waveguide crossing 220 nm SOI, 1550 nm, electron-beam lithography · 9.6 × 9.6 µm · cell ebeam_crossing4 Elliptical mode expanders widen the mode before the crossing so it diffracts less; under 0.2 dB loss and below −40 dB crosstalk. Design: Wei Shi (UBC, 2011), after P. Sanchis et al.. From: SiEPIC EBeam PDK (MIT), via ubcpdk (gdsfactory). [54]
Ring resonator with a TiN heater 220 nm SOI, 1550 nm, electron-beam lithography · 28.0 × 24.71 µm · cell ring_single_heater An all-pass ring drawn by the PDK's parametric cell, with a titanium-nitride heater above it for thermal tuning and metal routing to its pads. Design: gdsfactory ubcpdk contributors (parametric cell). From: SiEPIC EBeam PDK (MIT), via ubcpdk (gdsfactory). [18, 35]

CORNERSTONE PDK

CORNERSTONE is a UK rapid-prototyping service with several platforms. Its gdsfactory implementation, cspdk [19], covers 220 nm and 340 nm SOI, silicon nitride and others; here are a rib-waveguide 220 nm SOI pair and a 300 nm SiN pair, to compare the same building blocks across platforms.

Shallow-etch grating coupler (Si 220 nm) 220 nm SOI (strip and rib) · 402.0 × 20.0 µm · cell grating_coupler_rectangular_rib A rectangular grating partially etched into the 220 nm film, sitting on the 100 nm slab of a rib waveguide. Design: CORNERSTONE platform cells, gdsfactory implementation. From: CORNERSTONE PDK (MIT), via cspdk (gdsfactory). [19]
2 × 2 MMI coupler, rib waveguides (Si 220 nm) 220 nm SOI (strip and rib) · 94.8 × 16.0 µm · cell mmi2x2_rib A multimode-interference coupler in rib waveguides; the 100 nm slab around the ridge is the partial etch. Design: CORNERSTONE platform cells, gdsfactory implementation. From: CORNERSTONE PDK (MIT), via cspdk (gdsfactory). [19]
1 × 2 MMI splitter (SiN 300 nm) 300 nm silicon nitride · 164.7 × 12.0 µm · cell mmi1x2 The same building block in 300 nm silicon nitride: the lower index contrast makes everything wider and longer. Design: CORNERSTONE platform cells, gdsfactory implementation. From: CORNERSTONE PDK (MIT), via cspdk (gdsfactory). [19]
Elliptical grating coupler (SiN 300 nm) 300 nm silicon nitride · 61.83 × 44.19 µm · cell grating_coupler_elliptical A focusing grating coupler in silicon nitride. Design: CORNERSTONE platform cells, gdsfactory implementation. From: CORNERSTONE PDK (MIT), via cspdk (gdsfactory). [19]

Luxtelligence LNOI400 PDK

Luxtelligence’s LNOI400 PDK [21] is for thin-film lithium niobate: a 400 nm LN film etched halfway, so every ridge sits on a 200 nm slab. Lithium niobate’s Pockels effect makes it the platform for fast, low-voltage modulators (Chapters 19–20).

Directional coupler (TFLN) thin-film lithium niobate on insulator (LNOI) · 132.92 × 40.6 µm · cell directional_coupler_balanced Two lithium niobate ridge waveguides brought close together over a shared 200 nm slab. Design: Luxtelligence PDK cells, gdsfactory implementation. From: Luxtelligence LNOI400 PDK (MIT), via lnoi400 (gdsfactory). [21]
2 × 2 MMI coupler (TFLN) thin-film lithium niobate on insulator (LNOI) · 126.5 × 13.5 µm · cell mmi2x2_optimized1550 A multimode-interference coupler etched halfway into a 400 nm lithium niobate film, so the ridge sits on a 200 nm slab. Design: Luxtelligence PDK cells, gdsfactory implementation. From: Luxtelligence LNOI400 PDK (MIT), via lnoi400 (gdsfactory). [21]
Focusing grating coupler (TFLN) thin-film lithium niobate on insulator (LNOI) · 88.06 × 66.11 µm · cell gc_focusing_1550 A focusing grating coupler in thin-film lithium niobate. Design: Luxtelligence PDK cells, gdsfactory implementation. From: Luxtelligence LNOI400 PDK (MIT), via lnoi400 (gdsfactory). [21]

Coming next

  • VTT 3 µm SOI. VTT’s public gdsfactory PDK [20] draws its rib and strip waveguides with add and subtract mask layers but publishes no layer stack, so its devices will be added once the etch depths can be taken from a public source.
  • More SiEPIC devices: Bragg gratings, contra-directional couplers, the laser-integration cells of the Shuksan run [26], and active devices with doping layers.
  • InP and BTO. There is no open InP or BTO PDK with published layouts yet; this page will add one when there is. Commercial PDKs, including OpenLight’s heterogeneous InP-on-silicon platform, are under licence and are not shown.

How the models are made

For each device the script asks the PDK for the cell, keeps the patterned layers of its layer stack (dropping the substrate, buried oxide and cladding), and extrudes every polygon between that layer’s zmin and zmin + thickness with gdsfactory’s to_3d. It then recolours the layers by material (silicon blue-grey, silicon nitride amber, lithium niobate rose, heaters bronze, metals grey), adds the translucent BOX plate, rotates the scene so that the wafer normal points up, and writes a binary glTF file [27] with one named material per layer, which is what lets the legend hide layers. Partially etched layers appear as separate slabs, so the 70 nm shallow etch of a grating coupler or the 200 nm LN slab under a ridge can be seen directly.


Back to top

Open-Photonics, draft v0.1 (November 2026) · Source on GitHub

This tutorial is being written with the help of AI tools and may contain mistakes. If you find one, please open an issue, and we will correct it. Text and figures CC BY 4.0, code MIT; third-party PDK devices keep their own licences and credits.